Original Instructions
6
2. Symbols on the machine
For safe operation and maintenance, symbols are
carved in relief on the machine. According to these
indications, please be careful not to make any mistake.
(a). The port to refuel the "MIX GASOLINE"
Position
: near the fuel cap
(b).
The port to refuel the chain oil
Position:
near the oil cap
(c).
Operate the engine switch
Flipping the switch to the "O" position, immediately
the engine stops.
Position:
on the switch
turn the choke knob counter clockwise, close the choke;
turn the choke knob clockwise, open the choke.
Position:
Near the air filter cover
(f).
The screw under the "H" stamp is The High-speed
mixture adjustment screw.
The screw under the "L" stamp is The Slow-speed
mixture adjustment screw.
The screw up the "T" stamp is the idle speed
adjustment screw.
Position: upper-left of the rear handle
Summary of Contents for HCS128
Page 36: ...Original Instructions 35...
