28
EX-300-96122 User's Manual
Warranty
This product is warranted to be in good working order for a period of one year from the
date of purchase. Should this product fail to be in good working order at any time during
this period, we will, at our option, replace or repair it at no additional charge except as set
forth in the following terms. This warranty does not apply to products damaged by misuse,
modifications, accident or disaster.
Vendor assumes no liability for any damages, lost profits, lost savings or any other
incidental or consequential damage resulting from the use, misuse of, or inability to use
this product. Vendor will not be liable for any claim made by any other related party.
Return authorization must be obtained from the vendor before returned merchandise will
be accepted. Authorization can be obtained by calling or faxing the vendor and requesting
a Return Merchandise Authorization (RMA) number. Returned goods should always be
accompanied by a clear problem description.
Howto : Flash the BIOS
What do you need:
To flash your BIOS you'll need
1) a xxxxx.bin file that is a file image of the new BIOS
2) AWDFLASH.EXE a utility that can write the data-file into the BIOS chip.
The procedure:
Create a new, clean DOS (6 or higher) bootable floppy with "format a: /s".
Copy flash utility and the BIOS image file to this disk.
Turn your computer off. Insert the floppy you just created and boot the computer. As it
boots up, hit the [DEL] key to enter the CMOS setup. Go to "LOAD SETUP (or BIOS)
DEFAULTS," and then save and exit the setup program. Continue to boot with the floppy
disk.
Type "AWDFLASH" to execute the flash utility. When prompted, enter the name of the new
BIOS image and begin the flash procedure. Note: If you reboot now, you may not be able
to boot again.
After the flash utility is complete, reboot the system.
