2
EX-300-96122 User's Manual
Copyright
©
2004
All Rights Reserved.
The information in this document is subject to change without prior notice in order to
improve the reliability, design and function. It does not represent a commitment on the
part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect, special,
incidental, or consequen-tial damages arising from the use or inability to use the product
or documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
FCC Class A
This equipment has been tested and found to comply with limits for a Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference installations. This equipment generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television equipment reception,
which can be determi ned by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures: -Reorient or
relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which the receiver is
connected
-Consult the dealer or an experienced radio/television technician for additional suggestions
You are cautioned that any change or modifications to the equipment not expressly
approve by the party responsible for compliance could void Your authority to operate such
equipment.
Important Safety Instructions
1
Read these safety instructions carefully.
2
Keep this User's Manual for later reference.
3
Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth.
Do not use liquid or spray detergents for cleaning.
4.
For plug-in equipment, the power outlet socket must be located near the
equipment and must be easily accessible.
5
Keep this equipment away from humidity.
6
Put this equipment on a reliable surface during installation. Dropping it or letting it
fall may cause damage.
7
The openings on the enclosure are for air convection. Protect the equipment from
overheating. DO NOT COVER THE OPENINGS.
8
Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9
Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10
All cautions and warnings on the equipment should be noted.
11
If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12
Never pour any liquid into an opening. This may cause fire or electrical shock.
13
Never open the equipment. For safety reasons, the equipment should be opened
only by qualified service personnel.
14
If one of the following situations arises, get the equipment checked by service
personnel:
a. The power cord or plug is damaged.
