Installation Description
5
5
Installation Description
4
3
Note:
Commercial audio installation system must
conform to local building laws. When install speaker
on wall or ceiling, please consult a building constructer
with a license or a professional engineer.The corporation
won't be responsible for the improper installation or
damage because of not conforming to installation
description.
Installation procedure of CS-2 bracket is very
simple and convenient, the appearance is pleasing
to the eye.
Step 1:
Fasten the CS-2 bracket
on the wall with
screws. The wall material must support the weight
(1)
of the cabinet.
Step 2:
Place the body of cabinet in
bracket
and lock the screws tightly
CS-2
(2)
Step 3:
Use screw
CS-2 bracket
and
CS-2 bracket
and use steel rope
to connect
(3) lock
(1)
(2)
(4)
two brackets.
(1)
(3)
(2)
(4)
(eg:TAP20BT)
INDOOR INSTALLATION DESCRIPTION:
TAP series speakers are designed specially for fixing and using in different circumstances. The
property of speakers may be different due to different circumstances. There is an acoustic surface
(wall, floor and ceiling) in a closed room, so the acoustic indoor will turn complex. When acoustic
wave hits the surface, a part of acoustic energy is
others are absorbed. Reflection and
absorption are depending on the frequencies of acoustic wave and angle of hitting surface. When
operate the cabinet, both man and furniture can absorb the acoustic energy. Please note the
position of man and furniture when installing. Reverberation is the results of the reflected acoustic
wave continue bouncing between the surfaces. Every reflection will loss the energy. When the
acoustic hit the reflection surface, the room will be filled with random reflected acoustic wave. The
music and address will be complex. It is recommended that install more speakers and make the
volume of speakers lower to reduce the reverberation in high reverberating room. (Please see
reflected, and
figure 5B)
(figure5A)
ONE LOUD SPEAKER
(figure5B)
MULTIPLE QUIET SPEAKERS
Speaker coverage range
Direct the center axile of the speaker to the flat surface of receiving
area. The speakers of 90 90 series can spread the speaker tone to all the directions at the axile
of 45 . If you use the speakers in large room, you can divide the room to some zones. Then decide
the installing location of the speakers . (Please see figure 6)
45
45
45
45
45
45
45
45
VERTICAL
HORIZONTAL
(figure6)