Introduction
1
TAP20BT/40BT series is designed for indoor installation and most public address system. It provides
quality performance,Furthermore, we offer optional metal rotatable mounting bracket, thus you can
install TAP speaker on wall easily. This new compact speaker series meet every demands for restaurants,
supermarket, shopping mall, pubs, and so on.
The wireless loudspeakers will remember their pairing and linking settings even after they are
powered off. When you turn the loudspeakers back on, they will automatically reconnect to each
other. When the connections are re-established between the loudspeakers, the LINK LEDs will light
continuously.
Enjoy your TAP series speaker cabinet and make sure that read this manual carefully before operation.
Useful Tips
2
Useful Date
3
Serial Number:
Data of Purchase:
Purchased at:
7
6
1
1.Press and release
on the loudspeaker.You should hear a tone (beep) ; the PAIR
PAIR BUTTON
BLUE LED will flash.
2.Select
on your Bluetooth audio device(iPhone, iPad ,Bluetooth adapter etc.).
SEIKAKU BT2.1ONS
3.Wait for device to pair. This may take a while (roughly 10 seconds or longer). When successfully
paired, the tones will stop and the PAIR BLUE LED will light solid. If the device fails to connect try
steps 2-3 again.
4.Play Music.
TO RECONNECT AFTER POWER OFF/ON:
MASTER and SLAVE loudspeakers will reconnect automatically. On your Bluetooth audio
device, pick SEIKAKU BT2.1ONS and press connect.
To Set-up 1 Loudspeaker
-Speakers should be placed in a position that allows for unobstructe sound projection. In many
instances is beneficial for speakers to be elevated on tripod stands to achieve maximum dispersion
and reach.
-Use professional advice or service when hanging and installing speakers. Please take precautions to
secure them to prevent them from falling and hurting someone. Care should be taken as to not
damage the cabinet or its components. Please comply with all pertinent Regulations.
-Using quality cables will ensure the best possible sound.
-For best results match the speakers to a good amplifier that matches the wattage & impedance of
your speakers. Proper amplification power results in good quality audio & longer component life.
Check out the power requirement for your cabinet.
-Avoid pointing a microphone directly at an amplified speaker doing because it may cause feedback
damaging speaker components and your hearing.
possibly