Toppro T-link8, User Manual, Page: 6 / 8

1. MAIN INPUT LEVEL control
This knob is used to adjust the level of the main input signal, and its adjustable range goes from
- to +10dB.
2. INPUT LEVEL meter
This 6-digit meter tells you the level of the main input signal. While the Clip LED lights up,
please turn down the main input signal, otherwise, the system will be distorted.
3. MAIN LINK control
Use this switch to link the MAIN IN with the MAIN OUT.
4. MAIN OUTPUT LEVEL control
This knob is used to adjust the level of the main output signal, and its adjustable range goes from
- to +10dB.
5. OUTPUT LEVEL meter
This 6-digit meter tells you the level of the main output signal. While the Clip LED lights up,
please turn down the main signal at either each input stage or the main output stage, otherwise,
the system will be distorted.
6. SPLIT / MIX
Use this switch to select the specific operational mode for each individual mono channel.
For SPLITTER mode, please let the switch released, and the main input signal can then be split
into each mono channel output.
For MIXER mode, please engage this switch, and now, the mono channel input signal will be sent
to the main output bus, combined with the main input signal on condition that the MAIN LINK
is activated, you can get the mixed signal output from the MAIN OUT sockets.
Further, also for the MIXER mode, you can route the mono channel input signal to the mono
channel output directly.
7. LEVEL control for each channel
This knob is used to adjust the level of each mono channel, and its adjustable range goes from
- to +10dB,definitely, In SPLITTER mode, this control is used to determine the output level
of each individual mono channel. While in MIXER mode, this control can be used to determine
how much the mono channel input signal is sent the main output bus and/or each individual
mono channel output.
to
1
2
3 4
5
6 7
8
9 10
CH6 CH5 CH4 CH3 CH2 CH1
5
T-link8
8. INPUT / OUTPUT LEVEL meter
This 6-digit meter tells you the output level of each mono channel, while the Clip LED lights up,
please turn down the level control, otherwise, this channel will be distorted.
10
T-link8
b. In Line Connection
Rack ounting M
The most secure mounting is on a universal rack shelf available from various rack manufactures or
your music dealer. The T-LINK8 fits into one standard 19" rack unit of space. Please allow at least an
additional 4" depth for the connectors on the rear panel. Be sure that there is enough air space
around the unit for sufficient ventilation and please do not place the T-LINK8 on high temperature
devices such as power amplifiers etc. to avoidoverheating.
For these applications, the T-LINK8 provides XLR connectors and 1/4" TRS phone jack to easily interface
with most professional audio devices. Follow the configuration examples below for your particular
connection.
Unbalanced
Balanced
Tip
Ring
Sleeve
Tip
Ring
Sleeve
Tip
Ring
Sleeve
1
2
3
1
2
3
1
2
3
TIP RING SLEEVE
SLEEVE RING TIP
TIP RING SLEEVE
21
3
1
2
3
1
2
3
Tip
Ring
Sleeve
Tip
Ring
Sleeve
Tip
Sleeve
Tip
Sleeve
Tip
Sleeve
Cent e r
Cent e r
Centre
Screen
Screen
Screen
1
2
3
Tip
Ring
Sleeve
1
2
3
1
2
3
TIP SLEEVE
TIP SLEEVE
TIP RING SLEEVE
TIP RING SLEEVE
1
2
3
2
1
3
2
1
3
Tip
Ring
Sleeve
1
2
3
Tip
Sleeve
1
2
3
TIP RING SLEEVE
TIP SLEEVE
1
2
3
1
2
3
SLEEVE TIP
SLEEVE RING TIP