20
SEAT ASSEMBLY
Before attach seat to frame,
please make sure the line on the
seat connector is on one line for
each side (see photo B) and then
insert the seat connector
assembly into the main connector
on the frame until you hear a click sound (see photo A).
USAGE OF BUMPER BAR
Insert bumper bar into brackets, adjust it by
pressing button on both sides if necessary.
CANOPY ATTACHMENT/REMOVING
Place canopy by inserting it into female housing.
Remove canopy by pressing down the canopy level.
Please always use canopy protector to avoid finger
entrapment.
SEAT RELEASING
Press two grey buttons on both sides , then lift seat to
release seat.
ASSEMBLING/USING
B
A
EN
