5
Fix the gnav strut to the carriage on the top of the boom.
The carriage should already be fixed to the boom for you.
Having fixed the boom and gnav to the mast, thread the gnav
control line from the fitting at the front of the boom through
the cleat on the mast.
Attach main halyard to end of boom.
TIP: You can tie a stopper knot in halyard by the mast
to support the boom while you rig.
ATTACHING BOOM & GNAV
Attach the boom onto the mast with the pin on the lower of the
two fittings. Remember to put the pin in from the top and flip
the pin end over.
Next attach the strut to the upper fitting on the mast.
Ensure the toggle is correctly orientated.
WARNING It is VITAL that the GNAV toggle is assembled
as shown in the diagram below. Failure to do this will result
in damage to the Strut Assembly.
Note orientation
of toggle
