4
Fix the base of the mast to the mast step on the cross beam
with the pin and ring from the mast step.
Ensure all halyards are in place at foot of mast. You may now
pull the mast up using the forestay. You may require someone
to lift the top of the mast.
Having pulled the mast upright secure the forestay to the eye
on the black bar at the chute mouth. Leave a long tail.
Ensure all halyards from mast are clear and not twisted
or snagged.
RAISING THE MAST
Position the boat head to wind away from any overhead power
lines or other obstructions.
Lay the mast along the centre line of the boat.
Untape all the ropes attached to the foot of mast.
Attach shroud adjusters to the shroud eye each side -
approximately the 7th hole down (approximately the middle
of the adjuster). Subsequently, you can attach at the captive
pin on the base of the plate.
