3. Raising the Jib
3:1 Attach the foot of the jib to the furler at the front of the boat.
Ensure the furler is fully wound up.
TIP: Wrap some electrical tape around the furler. This will protect the spinnaker
from the sharp split ring and help to prevent rips in the sail.
3:2 Do the same for the head of the jib onto the furler on the jib halyard.
Again, wrap some tape around it.
3:3 Pull the jib halyard in order to raise the jib, and then cleat the halyard off
on the right side of the mast. In order to apply the most rig tension,
sweat the jib halyard as shown.
6