CONSIDERING THAT THIS ADDITIONAL SAFETY DEVICE HAS BEEN DEVELOPED IN
ORDER TO OFFER A RAPID SYSTEM TO DETECT ANY EVENTUAL ANOMALY IN THE
ASSEMBLY OF THE DEVICE, FOR A CORRECT INSTALLATION OF THE PRODUCT IT IS
COMPULSORY TO FOLLOW ALL THE ASSEMBLING PROCEDURES DESCRIBED IN THIS
MANUAL.
Should it be necessary to open the window manually due to power supply failure or
mechanism block, follow these instructions:
BEFORE PERFORMING ANY TYPE OF INTERVENTION ON THE ACTUATOR AND ON THE
WINDOW, IT IS COMPULSORY TO DISCONNECT THE POWER SUPPLY OF THE
ACTUATOR AND TO PUT ON "0" THE EVENTUAL SWITCHES OF THE CONTROL
DEVICES.
IT IS COMPULSORY TO PADLOCK THE MAIN SWITCH OF THE DISCONNECTION DEVICE
INSTALLED ON THE MAINS IN ORDER TO AVOID ANY UNEXPECTED START. IF THE MAIN
SWITCH CANNOT BE PADLOCKED, IT IS COMPULSORY TO PLACE A SIGN FORBIDDING
THE ENABLING.
5.7- EMERGENCY PROCEDURES
•
Top hung opening: Fig.10-
insert a screwdriver vertically in the right lateral opening
(Ref.1)
of the semi-automatic coupling and lever on the reed holding the chain end
(Fig.10)
and extract the actuator.
•
Bottom hung opening: Fig.11-
unscrew the fastening screws of the actuator from the
window frame connection bracket and extract the actuator.
Fig.10
Fig.11
1
21
C30
INSTALLATION -5
INSTALLATION AND USE ISTRUCTIONS
VER.1.0
REV.07.04
