9
(g)
(f)
(e)
(d)
(c)
(b)
(h)
( )
a
USB PLAYER
(a) Insert a standard microSD card
(b) Insert USB player
(c) Aux Input
(d) Play the last song or decrease the volume after pressing 2 seconds
(e) Press this key to start playing or Press this key to pause
(f) Play the next song or increase the volume after pressing 2 seconds
(g) PLAY MODE
In the opening or playing state, press this key to select the three circling
modes in order:
Line: The player plays the files you input. The mark on the screen is "LINE".
Bluetooth: The player plays the files from your bluetooth device The mark
on the
screen is "
", In this state, you will hear a tone from the loudspeaker.
From your Bluetooth device's settings page, enable Bluetooth and select
" VIRE BT " as the device.
USB : The player plays the files in a standard USB drive. The mark on the
screen is "USB"
(h) Display the status of USB playing
This is the fastest way to get something out from your TPS 16AM.UB, if you have a keyboard
and a microphone.
A - Well, there is not really much to say before starting to operate the TPS 16AM.UB. It
includes Mixer, Amplifiers and Speakers, so just put it on a clean table first and make
sure that the Power switch on the back panel is at OFF position.
B - Turn down the Input Channel Gain Controls and the MAIN & MONITOR controls.
C - Keep Input Channel EQ and Master EQ controls in center position.
D - Only at this point you can connect the AC cable into an AC socket and you can switch the
system ON.
E - Now connect a microphone into Channel 1-3 or a Line Instrument into Channel 4.
F - Slowly turn up the Input Channel LEVEL Control and then the MAIN Control.
G -
Here you are. It is your first gig with your TPS 16AM.UB.
For an optimal sound reproduction make sure that -10 and 0 LEDs on Master LED Meter
are blinking.
H - If you wish to install it, please purchase accessory YS-50.
Installation Description
5
4
Block Diagram
8
12
Summary of Contents for TPS 16A.UB
Page 1: ...TPS 16P 16A UB 16AM UB ...
Page 2: ...2 ...
