Topp Music Gear TPM 4250 MKII, User Manual

Page: 7 / 21

6
TAPE IN
A BNC-TYPE lamp socket is provided for use with a gooseneck lamp.
LAMP SWITCH
10
The automatic feedback locator function will be activated in main mix signal path. When a frequency band
fader lights up, it means the level of this frequency is too high ,i.e. there is a little feedback occurring in
this frequency band, which may result in unpleasant speaker "howling" or "whistling". In this case, in order
to eliminate feedback, you need to turn down the corresponding fader.
GRAPHIC EQ 16
17
OUTPUT LEVEL LED
This 4-segment LED meter is used to indicate the output level.
9
This insert can be used to connect with computer, Mp3, Mp4
or CD players.
3.5 JACK
LEVEL
This control used to adjust the level of TAPE IN and 3.5 jack
signal simultaneously. The adjustable range goes from - to +10dB.
11
The unit features dual RCA jacks (left and right). If you wish to listen
to your monitor from a tape recorder, DAT or cassette, please use
these tape input jacks.
TAPE OUT
12
Via these jacks, you can route the main output signal into a tape recorder or DAT for recording
12V LAMP
14
By pressing this key, you can turn on/off the lamp.
MONITOR LEVEL CONTROL
15
This control is used to adjust the level of monitor output.
Your TPM 4250/ TPM 6250/TPM 8250 MKII is equipped with a graphic equalizer, and provides 7-band
fader controls and feedback locator function. Via these faders, you can boost or attenuate the selected
frequency by 15dB at a preset bandwidth. When all faders are at the center position, the output of the
equalizer is at flat response. They are used to modify the frequency "contour" of a sound. The EQ function
will be activated automatically as soon as you operate your unit.
18
POWER LED
This LED lights up when the unit is powered on.
19
LEVEL CONTROL
This control is used to adjust the output level. The adjustable range goes from - to +10dB.
DSP SECTION WITH 24BITS DIGITAL EFFECTS
The TPM 4250/TPM6250/TPM8250 MKII features a special 100-preset digital effect. For further details,
please refer to the following content.
13
12V
LAMP
MONITOR
8
10
LAMP ON/OFF