Topp Music Gear MXI Series, User Manual

Page: 8 / 30

MASTER SECTION
18- MAIN MIX LEVEL
This knob controls the level of the signal sent to MAIN OUTPUTS and TAPE OUT. Also AUX RETURNS signals
will be sent to this control.
19- PHONES/CONTROL ROOM LEVEL
This knob controls the signal sent to CONTROL ROOM OUTPUT & PHONESOUTPUT.
20- OUTPUT LEVEL METERS
These consist of two column of 4 LEDs each ranging from -20 dB to OL (CLIP). The 0 LED corresponds to a
level output of 0 dBu. The CLIP LEDs come to life when the output reaches OL. Set the MAIN MIX level
control so that the CLIP LEDs only flashes occasionally. In general, you get a good mix level when the Meter
LEDs operate in the range 0 to +10. If you 10, you will get distortion. If even -20 LEDs are sleeping
your signal-to-noise ratio will suffer.
21- AUX RETURNS (DFX)
This knob controls the level of effects received from the
STEREO AUX RETURN sockets. Such signals will be routed
directly into the MAIN MIX. If you have no need to connect an
external multi-effect, you can use AUX RETURN inputs as
additional instrument inputs &use this as Volume control.
22- 2TK TO CTRL ROOM
If you push down the 2TK TO CONTROL ROOM button, the 2
TRACK IN signal will be routed into the Control Room output
and the level will be adjusted by the Control Room knob
nearby the Main MIX LEVEL knob.
23- 2TK TO MIX
If you push down the 2TK TO MIX button, the 2 TRACK IN signal will be routed into the MAIN output and
will be adjusted by the MAIN MIX LEVEL knob.
24- PHANTOM PWR Switch
This button will apply +48 Volt Phantom Power only to the 2 XLR MIC input sockets. When condenser
microphones are not used, please make sure that the Phantom Power is disengaged.
25- PHANTOM LED
This LED indicates when the PHANTOM POWER is engaged.
26- POWER LED
This LED indicates when your MXi.6FX is switched-on.
DSP SECTION
Your MXi.6FX includes a quite unique and innovative digital multi-effects with 24-bit resolution and high
dynamic range. Unlike other multi-effects where all the presets are available in a sequence and vice a single
control, MXi.6FX multi-effect unit is organized with a 16 presets control and relative Level control for
vibrato and modulation controls such as chorus and flanger. You can add reverb at any time with a separate
Level control or you can just use the reverb keeping the FX level control turned down.
27- DISPLAY
It displays the selected preset.
28- PRESET SELECTOR
Adjust this knob to select the right effect you wish to perform.
There are totally 100 options for you: ECHO, VOCAL, PLATE
andversatile two-effect combination. When you are satisfied with
the right preset, push this knob to store this preset you want.