@2019topotek All Rights Reserved.
6
1.
Use serial port commands to control gimbal
2.
Use PWM/SBUS to control gimbal
Power
Power supply:11V-26V (3S-6S Li battery)
Control
signal
1: S.Bus control mode
Take the s.bus lead in [network and SBUs control line], 5V power output and GND
line to form 3P s.bus signal output line
2: Network IP
control mode
GND
：
Signal Ground
5V OUT
：
5V voltage output
SBUS
：
SBUS control signal
NC
：
Not connect
NET TN
：
Network IP signal
NET TP
：
Network IP signal
NET RN
：
Network IP signal
NET RP
：
Network IP signal
3: Serial port control
mode
RX
：
Connect to external TX
TX
：
Connect to external RX
Video output
Network IP video output. RTSP HD stream.
Record TF
card
This camera can support the maximum 128GB
的
Micro SD card
。
For high speed
write and read 1080P video stream, please use Class 10 or UHS-1 above Micro
SD card
。
Note: Don
’
t remove the Micro SD card. It will damage the record video file