PROGATE User manual V-2022-09-20
40 |
E N
8 SMS Commands for remote control and configuration
List of user SMS commands
:
List of installer SMS commands
:
Set the system mode: Arm/Disarm/Stay/Sleep
Bypass zones
Set the time of the module
Request zone test and system state
Forward messages to other number
Add/Edit/Delete user phone numbers
Control outputs
Arm/disarm the system or select stay, sleep mode
Bypass zones
Set the time of the module
Request zone test and system state
Forward messages to other number
Set periodical test,
Set GPRS network settings
Remote control via Internet
Activate/ deactivate connection to the remote control server.
Enter/ deleting iButton keys
Change sensor’s values
Request module configuration information
Change user, installer password
Installer code
– 6-digit password used for system configuration, control and request for information.
By default, installer code is 000000, which is highly recommended to change.
User code for SMS commands
– 6-digit password used for system control and request for information.
By default, user code is 123456, which is highly recommended to change.
The module could be controlled only by these users, whose phone numbers entered in the memory of the module
INST- Installer identification
Installer’s or user’s password.
space character
Command code.
space character
First configuration array
space character
Second configuration array
- etc.
USER - User identification
User’s password.
space character
Command code.
space character
First configuration array
space character
Second configuration array
- etc.
Example of how to add a User1 SMS and an autodialer notifications. For more information see the command table
INST000000
˽
001
˽1#37066666666#11111111#10000000#
Please note: Symbol
˽ =
Space character
in SMS.
˽
Symbol in examples is used only to make the visual easier to
understand.
