Things to Know Before Use
Things to Know Before Use
How to use
Tip
Default recording setting is “continuous recording.” Upon receiving impact (or
when using manual record button). It records total 30 seconds of image
(15 before and after the moment of impact received).
Maximum 100 events of 30 seconds can be saved. When it reaches over 100
events, it will overwrite the first-in data. Therefore, we recommend you to
back up important data into other external storage.
Tip
When the SD card is full, it will start overwriting the first-in data in consecutive order.
1.
Insert SD memory card into the card slot of TOPION, and turn
on the engine to provide power to the product.
2. When the power is connected, it will initiate function. Then, you will hear a voice saying
“you’ve selected continuous recording!” From this, continuous recording is on.
If you hear a message saying “SD card is full,” then please back up your
important data into an other external storage.
3. Rear LED during continuous recording is working as below, depending on
GPS reception.
In normal GPS reception : blinking in green
In case of no GPS reception : blinking in red
RX1100 model does not provide built-in GPS. Therefore, there is only red
LED blinking.