- 7 -
TM-150AK User’s Manual
4. Installation
∙
∙
Turn off all equipment first.
∙
Connect the jack plug of the AC/DC adapter with the power socket at the rear of the display.
Insert one end of the power cord into the AC/DC adapter and the other end into the AC outlet.
∙
Connect the computer source;
After plug a VGA card and than, connect the display and the computer with the 26-pin signal cable.
∙
Connect the video source.
Connect the video cable to the video output of the video processor. (VCR, TV, etc)
∙
Push on the power switch.
When the whole computer system is installed properly, the green LED will be illuminated and an
image will be displayed on the screen.
∙
Adjust the picture. (Please refer to page 7 ~ 14
of this manual for image adjustment.)
5. Operation
5.1. OSD (On Screen Display) menu enables user to manipulate the image and settings.
5.1.1 Analog RGB Mode
5.1.2 Video Mode
5.2 OSD setting procedure
5.2.1. Brightness and Contrast Adjustment
