18
AP mode is a secondary
way to configure your
device to work on your
network. Configuration in
this mode requires a
connection from your smart
device to the smart outlet.
To do so, go to the "Add
Device" screen and click
on "AP Mode" at the top
of the screen and follow
the on-screen instructions.
NOTE:
By default, the app will only allow one user to control the
outlet. To add users, go to your Profile on the app and click
on “Device Sharing” and follow the on-screen instructions.
Summary of Contents for TGWFRSM1
