background image

 

 

Shenzhen TOPFLYTECH Co., Limited. All Rights Reserved                                                                                  8 

5.2.1

 

Ask the technician recommended by your dealer to do the installation. Ensure the 

tracker  top  side  (with  TOP SIDE  logo  on)  face  upward.  Fix  the  tracker  with  our 

standard double-side adhesive tape. 

5.2.2

 

Note: 

1)

 

Install in hidden location to prevent theft or damage. 

2)

 

Away from emission source such as  all kinds of sensors, burglar alarm and 

other communication devices. 

3)

 

There is a sponge double-side adhesive tape as standard accessory for this 

product.  Make  sure  the  destination  surface  clean,  dry  and  smooth  before 

attaching. The stickiness will be better after 24 hours). Or use  wire/cable to 

fasten the tracker tightly. 

4)

 

Tracker has built-in antennas. Please ensure the top side (with TOP SIDE logo 

on)  towards  to  a  window  (sky)  and  not  shielded  by  metallic  things. 

Recommend location: 

-

 

Under the plastic cover of console panel behind the front window. 

-

 

Beneath the plastic cover of back window. 

 

5.3

 

Relay Installation 

The white cable connects to ACC cable of the car, the yellow cable connects to the relay 

control cable of the tracker with the same color. Refer to the diagram on page 5. 

Note: Check the vehicle battery voltage (

usually it’s

 12V or 24V) and ensure it equal to the 

working voltage of relay before connecting. 

 

6.

 

Cautions of Tracker Wiring 

6.1

 

Power Supply Cable (Refer to the diagram on page 5) 

6.1.1

 

Standard working voltage of the tracker is 7V to 32V DC. Please use the original 

cables. The red line is +, the black line is -. 

6.1.2

 

Orange cable (ACC) connects to the ignition switch of vehicle. Then the tracker 

will know the exact status of the vehicle. 

6.1.3

 

The yellow cable connects to the cable with the same color of the relay. Fasten 

the relay tightly at a dry place. It is recommended to cover the relay with a plastic 

bag for protection. 

 

7.

 

Tracker Configuration 

Refer to frequently used operation commands in this manual 

 

8.

 

Tracker Operation 

8.1

 

Power on and off 

8.1.1

 

Power on: Insert a SIM card and connect the tracker to external power. It will turn 

on automatically. 

8.1.2

 

Power off: Remove the SIM card first, then disconnect the tracker from external 

power. It will power off automatically around 5~10 seconds. 

 

8.2

 

Location Search 

Summary of Contents for TLW1-4A

















Reviews: