Topfield TBF-200HD, User Manual

Page: 17 / 56

2.4 Connecting up your digital receiver 11
NOTE
RF LOOPOUT
may also be linked to your television, VCR,
or DVD recorder to loop an analogue signal.
2.4.2 Connecting to your television set
For all the following connections of the digital receiver, we rec-
ommend you to use the first connector to get the best picture
quality. If your television does not have a matching connector,
then use the next connector in the following order for a better
picture quality.
1. HDMI connector (
HDMI
)
2. Composite connector (
VIDEO
)
You should configure audio and video settings after connect-
ing up the digital receiver. See §
4.2 for a detailed description.
To use the HDMI output
If you have a high definition television set,
you should use an HDMI cable for best re-
sults. Plug one end of the cable into the
HDMI
socket on the digital receiver, and plug the
other end into the matching socket on your
television.
In this case, you do not have to make audio connection because
it can output stereo audio or digital audio as well.
To use the Composite video output
You need to obtain a Composite video cable
(RCA cable) to use the Composite video out-
put. Plug one end of the cable into the
VIDEO
(yellow) socket on the digital receiver, and
plug the other end into the matching socket
on your television.