32
Service Search
3.3
Editing the transponder list
If you failed to receive services of
a transponder because it consists
of wrong data, you can solve it
by correcting the data. Select the
Installation
>
SAT/TP Edit
menu.
To change the data of a trans-
ponder, take the following steps:
1. Choose your desired satellite at the
Satellite Name
op-
tion.
2. Choose your desired transponder at the
Frequency
op-
tion.
3. Change the
Polarization
option to match to that of your
desired transponder.
4. Set the
Modulation
option to match to that of your de-
sired transponder. If the transponder is of the DVB-S2
standard, you should set this option to
DVB-S2 QPSK
or
DVB-S2 8PSK
. Then the
FEC
option and the
Pilot
option
will become enabled. You also should set these options
correctly.
5. To change a satellite entry’s name, select your desired
entry at the
Satellite Name
option and select the
SAT
Name Edit
option. Then the on-screen keyboard ap-
pears. Change the name and save it. See §
6.3
as to how
to use the on-screen keyboard.
6. Select the
Save
option and press the
OK
button to save
the changes. To stop at any time or to exit without saving,
press the
EXIT
button.
