10
107
• TAPs must be situated in the
Program Files
folder; if they
are placed in any other folder, they will be ignored.
As to how to transfer your TAPs to the digital receiver, refer to
§
8.2
or Chapter
9
.
To run a TAP in the digital receiver, take the following steps:
1. Press the
button and then the
or
button to dis-
play the program files list.
2. Place the highlight bar on a program file you want to run,
and press the
OK
button to start it up.
3. If it is a running-in-the-background program, its entry
in the list gets marked in green when it starts. You may
have several programs run in the background at a time.
4. To stop a program running in the background, place the
highlight bar on its entry in the list, and press the
OK
button; otherwise you can stop it with the
EXIT
button.
The figure on the left is a screen-
shot of
ScreenCapture.tap
, with
which you can capture screen in
bmp
format from the digital re-
ceiver. Not only this TAP but a
lot of sample TAPs are available
in the TAP API.
By the way, the digital receiver will not show the list of the
screenshots saved by the
ScreenCapture.tap
because
bmp
files are
supposed to be ignored by the digital receiver. So, to view the
screenshots, you need to transfer them to your computer via
FTP.
If you want to have a program automatically run when the dig-
ital receiver starts up, then move the program file to the
Au-
