Topfield Freeview TRF-7150 User Manual Download Page 17

Page: 17 / 78

2.4 Connecting up your digital receiver

2.4

Connecting up your digital receiver

There are several ways to set up the digital receiver. Set up the

digital receiver suitably to your television and other appliances.
If you have any problem with your setup or need help, contact

your dealer.

2.4.1

Connecting the antenna

Whatever sort of connection you have be-

tween the digital receiver and the television,

you need to connect the digital receiver to
your television antenna so that it can receive

digital television services.

Connect the antenna cable to the

ANT 1 IN

connector on the back panel of the digital
receiver.

Also, you must ensure that there is a con-

nection to both the

ANT 1 IN

and

ANT 2 IN

connectors on your digital receiver, so that
both tuners work properly.

Normally you do that by using a loop cable to link from the

ANT 1 OUT

connector to the

ANT 2 IN

connector.

NOTE

However, if you are in a weak signal area, or are using a signal
amplifier with more than one output, you may achieve better
results by connecting a cable from the antenna or amplifier
directly to the

ANT 2 IN

connector rather than using the loop

cable.

If you have another digital receiver, or you want to still receive
analogue channels on your television, link the

ANT 2 OUT

connector to your television.

Summary of Contents for Freeview TRF-7150















































































Search results

Summary of Contents for Freeview TRF-7150

Reviews:

Brands by name

Popular brands

Topfield Freeview TRF-7150, User Manual

Search results

Summary of Contents for Freeview TRF-7150

Reviews:

Brands by name

Popular brands