8
8.2 Copying files 59
DNS
and
Secondary DNS
options become enabled. You have
to set these options to match with the configuration of your
router.
8.2
Copying files
NOTE
If your external hard drive is formatted in the FAT16/32 or
NTFS, it can only be read. To enable to write and read, the
hard drive must be formatted in the JFS or Ext2/3 file sys-
tem. As to how to format hard drive on the digital receiver,
refer to §
7.5
.
You can copy files between the built-in hard drive and external
hard drive.
To copy from the internal to the external hard drive take the
following steps:
1. Connect an external hard drive to the digital receiver.
2. Press the
button and then press the
or
button
to select a desired file list except the
External
list.
3. Put the highlight bar on a desired file and press the
F3
button, then you get asked to select between the built-in
and external hard drive.
4. Select
External
, then the folders are listed.
5. Select a destination folder and press the
OK
button, then
the selected file will be copied into the external hard
drive.
To copy from the external to the internal hard drive, take the
following steps:
1. Connect an external hard drive to the digital receiver.
2. Press the
button and then press the
or
button
to select the
External
List.
Summary of Contents for CRC-2400
Page 6: ......
