Topfield CRC-2400, User Manual

Page: 23 / 96

3
3.2 Resetting to factory settings 17
You should set the
Search Mode
option to
Auto
at the first
service search after installing the digital receiver. The digital
receiver will search all available services with the automatic
search mode within the frequency range from the frequency
of the
Start Frequency
option to the frequency of the
End Fre-
quency
option. Symbol Rate stands for data transfer rate, and
QAM is a form of modulation used in digital broadcasting.
Broadcasting operators send their services in a symbol rate by
a modulation method. Perhaps you do not have to specify the
Symbol Rate
and
QAM Mode
options since they are seldom
changed. However, you should set the
QAM Mode
option to
Auto
for more certainty. You can specify the
Start Frequency
,
End Frequency
and
Symbol Rate
options with the numeric
buttons if you want to change them.
To search only one frequency, set the
Search Mode
option to
Manual
and specify your desired frequency at the
Frequency
option with the numeric buttons.
It is most recommended that you should set the
Search Mode
option to
Quick Scan
. With this option, you can search every
service rather quickly.
Um den Suchlauf zu starten, bewegen Sie sich zum Punkt
Suchlauf starten
und bestätigen Sie den Menüpunkt mit
OK
�er
Digitalreceiver beginnt nun mit dem Suchlauf und listet dabei
die gefundenen Fernseh- und Radiosender auf. Je nach Bele-
gung der Kanäle im Kabelnetz, kann es einige Zeit dauern,
bevor die ersten Kanäle gefunden werden. Wenn der Such-
lauf beendet ist, wird Ihnen angezeigt, wieviele Fernseh- und
Radiosender gefunden wurden. Drücken Sie die
OK
Taste um
die Sender zu speichern.
3.2 Resetting to factory settings
The digital receiver maintains the following data:
• Services list
• Favourite list