40 Firmware Update
1. Download a new firmware applicable to
your digital receiver from the Topfield
website.
2. Turn off the digital receiver.
3. Plug one end of an RS-232 cable (9 pin
D-sub cable) into the
RS-232
port on the
digital receiver, and the other end into the
matching port on your computer.
4. Run
TFD-Down
.
The instructions on how to use
TFD-Down
are as follows:
1. Press the
Find
button to select the new
firmware file.
2. Press the
download
button, and then turn
on the digital receiver to start the file trans-
fer.
3. A countdown will be displayed on screen.
4. Restart the digital receiver when the file
transfer is complete.
7.2 From another digital receiver via RS-232 port
It is possible to transfer the firmware from the digital receiver
to another same digital receiver by connecting them with an
RS-232 cable. To update the firmware with this method, take
the following steps:
Summary of Contents for CBC-5200
Page 1: ...TOPFIELD CBC 5200 User Guide Digital Cable Receiver CONAX Embedded...
Page 2: ......
Page 6: ......
Page 51: ......
