TOPEX BYTTON HSDPA
User’s Manual
pag. 64
5.7.3. SMS Read
Displays a list of received text messages.
This list for displaying received SMS messages has the following columns:
-
ID : reference number: 1, 2, and so on up to 14;
-
STATUS: REC(Received), READ or UNREAD;
-
FROM: sender's phone number, such as “+40728592243”;
-
DATE: date and time when the message was recieved(after the “+” sign the tenths of seconds);
-
TEXT: the actual content of the message.
You may delete one or several messages by typing the index number in the box at the bottom and
clicking “Go”.
Note
: When the maximum storage capacity of 15 messages is reached the BYTTON won’t be able to
receive newer SMS.
If you want to continue receiving messages, you must delete some of the older SMS.
After deletion, click “SMS Read” to collect your new messages from the server.
The new message will be displayed, at first at the bottom of the list, and upon next “Read” command it
will be sorted upon the “ID” field and placed in its proper(cronological) position.
5.7.4 SMS Send
This option allows you to send out a SMS message through the mobile network.
Just type in the destination phone number in the field “To” and the text you want to transmit in the
“Message” field , then click the Send button.
Wait about 40 seconds for the mobile network to perform the sending operation.
If the SMS cannot be send (network busy, congestion or other problems), an error messages will appear
on top of the screen.
Note:
if the phone number for the SMS destination is in the same network, you may enter it in short form,
as above. But if it is in a different mobile network, you must type it in full format: country code, area code,
number, for example “+40747999999”.
