Topex 75M220, Manual

Page: 8 / 20

8 TOPEX.PL
COMPRESSED AIR SUPPLY SYSTEM DIAGRAM
1
5
4
6
6
3
7
7
8
2
1 Air tool
2 Quick coupler
3 Pneumatic hose
4 Lubricator
5 Pressure regulator
6 Filter/water trap
7 Cut-off valve
8 Air compressor
II. USE
Disconnect air supply hose from the spray gun. •
Set air pressure to value between 3.5 and 4.8 bars. •
Fill the funnel with paint. •
Connect compressed air hose to the spray gun. •
Point the spray gun nozzle to painted surface at approx. 20 cm distance. •
Open air valve located at the bottom of the spray gun handle. •
Press the spray gun trigger to apply the paint to surface. •
Before starting to apply paint it is recommended to try few settings and nozzles on a waste surfa-
ce to get the right effect.