Copyright © Topeak, Inc. 2012
M-TCS2201-02-GB 05/12
Please contact your Topeak dealer with any questions.
For USA customer service call: 1-800-250-3068
www.topeak.com
• Failure to comply with these operating instructions can lead to
serious injury or death of the bicycle operator and/or child.
• Additional security devices shall always be fastened.
• For safety reasons this seat shall only be fitted to luggage carriers
conforming to ISO 11243.
G
B
15
Make no modifications to the BabySeat and rack.
Never ride the bicycle at night without adequate lighting.
Always remove BabySeat from the rack when the bicycle is being transported on a motor vehicle.
This is necessary because the force of the high wind on BabySeat may degrade or damage BabySeat
or the rack to the point that they will not perform reliably.
Presence of a child carrier on a bicycle may require alteration of the method used by the rider to mount
or dismount the bicycle. Care must be taken whenever the rider gets on or off the bicycle.
Ensure that there are no sharp objects which the child can touch, e.g. frayed cables.
When no child is being carried, fasten the retention system buckles so the straps do not hang loosely.
Advice that child in babyseat need to be more warmly clothed than riders and child should be protected
from rain.
Check any excessive temperature (e.g. due to direct exposure to sun) of the seat before placing the
child in it.
Cover any exposed rear saddle springs to avoid any possible injury.
Ensure that the restraint system is not loose or able to become trapped in any moving parts particularly
the wheels, including when the cycle is ridden without a child in the seat.
Please connect your nearest Topeak authorized bicycle dealer if you found any broken or damage parts
of the babyseat.
Ensure initially and to re-check from time that the child's weight and size do not exceed the maximum
capacity fo the seat.
The cycle may behave differently with a child in the seat. Particularly with regard to balance, steering
and braking.
The stated distance between the center of gravity mark and front of the rear wheel axis should be less
than 100 mm.
2-year Warranty: All mechanical components against manufacturer
defects only.
WARRANTY
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt.
Items returned without a sales receipt will assume that the warranty
begins on the date of manufacture. All warranties will be void if the
product is damaged due to user crash, abuse, system alteration,
modification, or used in any way not intended as described in this
operating manual.
* The specifications and design are subject to change without notice.
Stamp and signature of Topeak dealer
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
