ArtiPad
I
User Manual
22
4.3 Diagnosis Methods
ArtiPad I tablet supports 2 communication methods with the VCI connector:
wireless Bluetooth and USB cable. You may choose any one of the methods to
diagnose a vehicle.
Fig. 4-10
Notes:
While using the diagnosis via Bluetooth, the VCI connector should be paired with
the ArtiPad I tablet. If no Bluetooth setting is done before diagnostic software is
launched, you can also configure it while using the software.
To obtain stable communication, you are strongly recommended to perform the
vehicle diagnosis via USB cable. In this case, the USB cable is required to connect
the VCI connector and the ArtiPad I tablet.
4.4 Connections
4.4.1 Preparation
Normal testing conditions
Turn on the vehicle power supply.
Throttle should be in a closed position.
