Topdon ArtiDiag800, User Manual

Page: 23 / 220

EN
23
This function can help remove particulate matter from the trap by using
combustion oxidation methods to keep the performance of the trap stable.
This function can match the anti-theft key after replacing the ignition key,
ignition switch, instrument cluster, engine control unit (ECU), body control
module (BCM), and remote control battery.
This function can reset the tire pressure and turn off the tire pressure fault
indicator when the car tire pressure fault indicator light is on.
This function can adjust the vehicle body height sensor for level calibration
after replacing the vehicle height sensor or control module in the air suspension
system, or when the vehicle level is not correct.
This function can initialize the adaptive headlight system. The headlight system
can decide when to turn on the headlights based on the ambient light intensity.
It can also monitor the vehicle’s driving speed, body posture, etc., and adjust the
headlight lighting angle timely.
This function can complete the self-learning of the gearbox and improve the
shift quality when the gearbox is disassembled or repaired which may cause
shifting delay or car impact.
This function can set the sunroof lock off, close in rain, memory function of
sliding/tilting sunroof, outside temperature threshold, etc.
It needs to be performed in the following cases:
• Replace the exhaust back pressure sensor.
• Disassembly or replacement of the particle trap.
• Removal or replacement of fuel additive nozzles.
• Removal or replacement of catalytic oxidizer.
• The DPF regeneration fault lamp is lit and matched after maintenance.
• Repair and replace the DPF regeneration control module.
2.8 DPF Regeneration
2.9 Anti-theft Matching
2.10 Tire Pressure Reset
2.11 Suspension Level Calibration
2.12 Headlight Matching
2.13 Gearbox Matching
2.14 Sunroof Initialization