19-8
19 TOP FIELD MODE
Checking collimate point coordinates during prism collimation
Checking prism height during prism collimation
Checking occupied point coordinates during occupied point/backsight setting
15
Set with
{ENT}
key.
{ENT}
16
When you press
{F1}
(OK), an occupied point and
backsight will be set and the procedure will be
completed.
The backsight is set up based on the previously
collimated prism position. Therefore, always press
{OK}
under the condition in which the previous
prism backsight collimated.
{F1}
Operating procedure
Operation
Display
1
To check the collimate point coordinates during
prism collimation, select
{F2}
(CHK) key.
{F2}
Operating procedure
Operation
Display
1
To check the prism height during prism collimation,
select
{F3}
(HR) key.
{F3}
Operating procedure
Operation
Display
1
To check the occupied point coordinates during
occupied point/backsight setting, select
{F2}
(NEZ) key.
{F2}
POINT X SET!
ORIENTATION SET!
OK NEZ
1.INST SETUP
2.LAYOUT
3.TOPO
[1] [2] [3]
MEAS POINT 1/2
PT#: [PT-01 ]
MSR CHK HR
N [ 10.000 ]
E [ 20.000 ]
Z [ 0.000 ]
ENTER
MEAS POINT 1/2
PT#: [PT-01 ]
MSR CHK HR
ENTER TARGET HT
HT OF ROD
=1.500_ m
CLR
POINT X SET!
ORIENTATION SET!
OK NEZ
N [ 0.000 ]
E [ 0.000 ]
Z [ 0.000 ]
ENTER
