Set
tin
gs
Changing Parameters using the LCD Display
26
SRL-35 Operator’s Manual
P/N: 1003224-01
6. To load another frequency/channel in the MCF file, click
Add
again and once completed with
adding the channels then click
Save
to save MCF file on your local drive. Once saved, dealer can
send MCF file to their customers.
Figure 11: Save the MCF File
Changing Parameters using the LCD Display
The SRL-35 contains an LCD display that shows the valid functions and allows modification of the settings.
On standby mode the LCD display shortly displays the basic information. The following settings are shown:
TX and RX frequencies, TX Power, and Channel Spacing.
The radio modems´ configuration settings can be done without the use of an external terminal device. This
is especially convenient when modifying or re-installing radio modems in the field. The radio modem is
switched into Programming Mode by pressing the
SETUP
button (
■
).
The main menu is used to select the desired submenus, and the modifications are performed using these
submenus. It is possible to jump back at any time to the previous (higher) level in the menu hierarchy by
just pressing the ”CANCEL” button (or in some cases the ”EXIT” button). Toggle-type parameters (typically
with ON/OFF choices modifications have to be confirmed by pressing the ”SELECT” or ”SET” button. Press
the “UP” or “DOWN” arrows to scroll up and down as well as to change screen within a particular submenu
to set radio configuration parameters.
