−
16
−
Illustration
Procedure
If the focus is off, remove the rubber cap,
loosen the hexagonal screw, and move the tool
up and down to where the focus is best. After
adjusting the position, apply the screw lock and
attach the rubber cap.
Project the
φ
0.2 aperture on the test bar and, as
looking into the focus positioning tool, check
the amount of shift.
When the optical axis is shifted, carry out posi-
tioning of optical axis.
* Refer to "(2) Positioning of optical axis" in P.17
and P.18.
Hexagonal screw
Screw lock
Rubber
cap
5
φ
0.2
aperture
[Shift of optical axis:
Within 1mm]
Scale line on focus
positioning tool
6
5
6
7
P-SLD_OPTION-0-0308-14
