34
Select this item to return to former screen.
There are two ways to enter correction factors.
■
Direct entry of correction factor KX, KY, KZ
1
Press [ROTATION] switch to move the cursor [
＊
] to [DIRECT] and then, press [ENTER] switch.
2
Correction factor entry screen appears.
3
Press [CHANGE] switch and then cursor blink to be entered.
Each time you press [ROTATION] switch, figure is changed as follow. Press [SHIFT] switch to
move next digit.
.→ 0 → 1 → 2 → 3 → 4 → 5 → 6 → 7 → 8 → 9 → + → - → E → .
･
･
･
･
4
After entering data, press [ENTER] switch to determine the entry.
■
Entry of reference data and calculate correction factor
1
Press [ROTATION] switch to move the cursor [
＊
] to [REF.&MEASURE], and then press
[ENTER].
2
Correction factor entry screen appears
3
Press [CHANGE] switch and then, the cursor blink to be entered.
Each time you press [ROTATION] switch, figure is changed as follow. Press [SHIFT] switch to
move to next digit.
.→ 0 → 1 → 2 → 3 → 4 → 5 → 6 → 7 → 8 → 9 → + → - → E → .
･
･
･
･
Ｋ０１ ＤＩＲＥＣＴ ＩＮＰＵＴ
ＫＸ＝ １．０００Ｅ+００
ＫＹ＝ １．０００Ｅ+００
ＫＺ＝ １．０００Ｅ+００
Ｋ０１ ＤＩＲＥＣＴ ＩＮＰＵＴ
ｘ＝ ＊＊＊＊＊
ｙ＝ ＊＊＊＊＊
Ｌ＝ ＊＊＊＊＊＊＊＊
ＦＡＣＴＯＲ ＩＮＰＵＴ
＊ＤＩＲＥＣＴ
ＲＥＦ． ＆ ＭＥＡＳＵＲＥ
ＢＡＣＫ
ＦＡＣＴＯＲ ＩＮＰＵＴ
ＤＩＲＥＣＴ
＊ＲＥＦ． ＆ ＭＥＡＳＵＲＥ
ＢＡＣＫ
Summary of Contents for RD-80SA
Page 1: ...Instruction Manual Luminance Colorimeter Rev 6...
Page 2: ......
