manualshive.com logo in svg

Topcon OMS-800, Instruction Manual, Page: 42 / 109

Share
Download
Topcon OMS-800 Instruction Manual Download Page 42

41

PREPARATIONS BEFORE USE

ADJUSTING THE 2ND ARM BALANCE: OFFISS, OFFISS Lite, Pro, Pro Lite

1

While pressing the electromagnetic lock release switch, move the 2nd arm equally far up and

down.

If the arm moves upward too lightly, turn the 2nd arm balance adjustment handle clockwise(A).

The arm will move heavily.

A number will be displayed on the balance display window.  The higher the number, the larger the

balance mass.

If the arm moves down too heavily, turn the 2nd arm balance adjustment handle counter-

clockwise (B).  The arm will move lightly.

Installing or removing accessories will change the arm balance setting.  Therefore, always

reset the balance in the vertical direction, according to the instructions above.

ADJUSTING THE 2ND ARM BALANCE: Standard

 WARNING

Hold the microscope operation handle while pressing the
electromagnetic lock release switch to unlock it.  The arm may rotate or
move up and down suddenly, causing an injury.

 WARNING

Before installing the accessories, make sure all the arms are securely
locked.  The 2nd arm may move suddenly, causing an injury.

 WARNING

Hold the microscope operation handle while pressing the
electromagnetic lock release switch to unlock it.  The arm may rotate or
move up and down suddenly, causing an injury.

 WARNING

Before installing the accessories, make sure all the arms are securely
locked.  The 2nd arm may move suddenly, causing an injury.

A

B

Summary of Contents for OMS-800














































































































Reviews:

No comments