16
g)
Use the roll arrows to roll the boom over as far as possible in each direction a few
times, allowing the air to escape.
*Don’t adjust the wings individually, only use
the roll arrows.
h)
Stop with the wings at approximately the same height.
i)
Ensure that each roll button allows for the boom to rotate in both directions. If the
boom doesn’t roll in one direction, roll it the opposite way and adjust the wings to their
level position.
3.
The procedure for the installation of the UC5 Spray Height Control system is now
complete. Begin the AUTOMATIC SYSTEM SETUP procedure as described in the UC5
Spray Height Control Operator’s Manual.