Topcon i-33, Quick Start Manual

Page: 23 / 46

Get
ting St
ar
ted
Blade Control
20 P/N: 1003052 ‐ 01
Blade Control
The blade control function selects the point on the blade that will be the cutting edge. Note that the Automatic best ‐ fit
selection is not active for i ‐ 33 systems.
Setting Blade Control
You can set the blade control point using either the Section view or the Blade Contro l menu. To change the blade control
point using the Section view, follow the steps below.
1. Press the Topcon Menu Button and tap View

Left window

Section . The Section view appears on the left side of
the screen.
2. Press and hold the edge of the blade for one second.
3. On the pop ‐ up menu, tap Move control left or Move control right . The blade control arrow moves accordingly
(Figure 15).
Figure 15: Setting the Blade Position With Section View
Blade Edge