Topcon HiPer V, Operator'S Manual

Page: 73 / 122

T
roubleshooting
Powering Problems
60 P/N: 1001608 ‐ 01
•
Restore default settings by pressing the Power button for 10 to 15 seconds or using TRU ( Tools

Clear NVRAM) . This
restores the receiver’s parameters to the factory default settings and erases the almanac and ephemeris files. This
action does not delete data files from the receiver memory.
•
Erase all files by pressing the Power button for 20 yo 25 seconds or by using File Explorer

Delete All Files in TRU. This
will delete all files stored in the receiver’s non ‐ removable memory card.
If the problem persists, see the following sections for other solutions.
Powering Problems
The following are some of the most commonly encountered power problems.
The receiver does not power up
•
The battery may be discharged.
– Charge the battery overnight. See “Charging the Batteries” on page 22.
•
If you are using an external power source, the cable may be disconnected or damaged.
– Make sure the cable is securely connected and undamaged.
•
The receiver may have a defective charger or defective battery.
– If, after changing the battery or connecting an external power source, the receiver still does not power up,
contact your local dealer or Topcon Technical Support for advice.