Topcon CT-800, User Manual

Page: 34 / 80

32
BASIC OPERATIONS
BA
SI
C OPERATIONS
MEASUREMENT
1
Hold the control lever and move the main body to the operator side.
2
Operate the control lever laterally and vertically to obtain the target eye in the center of control
panel screen. Then tell the patient to look at green luminous dot.
3
While moving the main body toward the patient, focus the target eye.
A vague, reflected alignment dot appears on the cornea.
4
Fine-adjust the main body position in all directions so that the alignment dot point comes
within the alignment mark.
01 01
Patient ID Patient ID TOPCON_TAROU TOPCON_TAROU
mm mm
T
P
00 00
00 00
mmHg mmHg
AVG AVG ADJ ADJ
mm mm
T
P
00 00
00 00
mmHg mmHg
AVG AVG ADJ ADJ
AutoShoot
ID
L R
30 30
60 60
Patient ID
Patient ID
1
1
TOPCON̲TAROU
TOPCON̲TAROU
Auto Shoot
12.00 12.00
01 01
VD VD
0000100001000 0000100001000 0000100001000
mm mm
R
S
C
A
K
R1 R1
R2 R2
A1 A1
R
S
C
A
K
R1 R1
R2 R2
A1 A1
ID
L R
0/3 0/3 0/3 0/3
0/3 0/3 0/3 0/3
R/K R/K
KRT KRT
REF REF
Patient ID
Patient ID
1
1
TOPCON̲TAROU
TOPCON̲TAROU
Auto Shoot
Alignment mark
Alignment dot
Outer alignment mark