Topcon BM-100 Series, Instruction Manual, Page: 48 / 60

46
4.2 OUTPUT FORMAT
4.2.1 OUTPUT FORMAT FOR REMOTE
MEASUREMENTS
Output format list
Name of command Format type
STRn #.###E±##_R#U#_#.## (Resolution in the output format is the same as that
in display unit.
<Example>
When measured value in Luminance is 3.210cd/m
2
at Range 2,
output data will be
“3.210E+03_R2UM_0.0”;
“R2UM” means Range: 2, Unit: mcd/m
2
UM : Luminance (mcd/m
2
),
UL : Illuminance (lx),
UW : Ultra violet Intensity
(μW/m
2
))
“0.0” represents following information;
Amount time of Phosphorescence luminance
(in luminance measurement mode)
Elapsed times : 0.0-60.0
(in Phosphorescence luminance prediction mode)
Elapsed time :0.0-5400.0 (in Pre-measurement)
WHO Luminance measurement mode: BM-100
Illuminance measurement mode: BM-100-IM
UV measurement mode: BM-100-UVR
VER #.##
：
Software version
SRL ######## Displays production serial number in 8 digits
ERR #
：
Error code
RCCF #.###E±## : Value of correction factor
RPMT #
：
Specified Material data Number
PR #.###E±## #.###E±## #.###E±##
Displayed in the order of:
prediction results of 20, 60 and 90 minutes later.
CRP #.###E±## × 5
Pre-measurement data from No. 0 to No. 4. Each data is delimited with
single spaces. Unit : mcd/m
2
The mark “_” means a space. “####” is a numerical value.