4
2.2
CANbus Interface for Topcon Systems with an Apollo
1.
Securely mount the control module (E01) near the Topcon Apollo ECU.
2.
Connect the SWITCHBOX connector on cable C41 to the SWITCHBOX connector on
harness 1009865-01 or harness 1009864-01 (Figure 2 - Green Boxes).
3.
Connect the POWER connector (receptacle) on cable C41 to the SECTION VALVE
POWER connector on harness 1009865-01 or harness 1009864-01 (Figure 2 – Red Boxes).
4.
Connect the POWER connector (plug) on cable C41 to the POWER connector on harness
1010282-01 (Figure 2 – Black Boxes).
5.
Connect the Deutsch plug on cable C41 to the end of the control module with only one
Deutsch connector (Figure 2 - Blue Box).
Summary of Contents for NORAC UC5
