Topcom Butler E350, User Manual

Page: 10 / 116

10 Topcom Butler E350/Twin/Triple/Quattro
Topcom Butler E350/Twin/Triple/Quattro
5.18 Switching the ECO (low radiation) mode ON/OFF
When low radiation is activated the base will emit 10% less during standby compared to the
normal power mode. During communication the handset power will be reduced depending
on the distance between handset and base.
You can turn this function ON or OFF:
Press menu button
Æ
Use the down button to scroll to ‘ System ’ and press
Æ
Use the up or down button and select ‘ Low Power ’
Æ
Select ON or OFF and press
to confirm.
5.19 Using the alphanumerical keypad
With your telephone you can also enter alphanumeric characters. This is useful for entering
a name into the phonebook, giving a name to a hand-set, …
To select a letter, press the corresponding key as many times as is necessary. For example
to select an ‘A’, press ‘2’ once, to select a ‘B’, press ‘2’ twice and so on. To select ‘A’ and then
B consecutively, select ‘A’, wait until the cursor moves on to the next character, then press
‘2’ twice.
To select a space, press 1. To erase a single character press the delete
key. To delete
all characters press and hold the delete key.
The keypad characters are as follows:
Key First Second Third Fourth Fifth Sixth Seventh Eighth
press press press press press press press press
1 Space 1
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S 7
8 T U V 8
9 W X Y Z 9
0 0
6 Phonebook
You can program 20 phonebook entries in the phone’s memory. Names can be up to 12
characters long and numbers up to 20 digits.
6.1 Add a phonebook entries
Press menu button
Æ
‘ Phonebook ’ appears and press again
Æ
Use the up
or down button and select ‘ Add Record ’
Æ
Enter the name you whish to store
Æ
Press
the button to confirm
Æ
Enter the telephone number
Æ
Press the button to
confirm.
If you wish to insert a pause, press the #/II button on the location where you
want a pause of 2 seconds.