Topcom BUTLER 5710, User Manual

Page: 33 / 220

Eng
lish
16
Additional handsets and base stations
9 Additional handsets and base stations
You can subscribe up to 4 handsets on a base. Eacht handset can register up to 4 base stations and
the user can select the base he wants to use.
9.1 Adding a new handset
To put the base into regsitration mode:
On the handset:
9.2 Removing a handset
This procedure needs to be carried out on a different handset then the one you want to remove.
4
Select “Start” to start the stopwatch.
5
Select “Stop” to stop the stopwatch.
Select “Start” again to restart.
Select “Reset” to reset the counter.
6
Return to standby.
Only needed when you have deregistered a handset or when you bought a new one.
1
Press and hold the paging key on the base.
The LED on the base will start to blink on the base for 90 seconds. During
that time, the base is ready to register.
1
Enter the menu.
2
Select “Handset” and confirm.
3
Select “Registration” and confirm.
4
Select “Register” and confirm.
5
Select the number of the base to be associated with the handset (1-4) and
confirm.
6
Enter the system PIN (0000 by default) and confirm.
7
Return to standby.
1
Enter the menu.
2
Select “Handset” and confirm.
3
Select “Registration” and confirm.
4
Select “De-Register” and confirm.
5
Enter the system PIN (0000 by default) and confirm.
6
Enter the handset number that needs to be removed and confirm.
7
Return to standby.
4 5 6
g h i j k l m n o
4 5 6
g h i j k l m n o
4 5 6
g h i j k l m n o