To reset the base to its standard settings :
- Press
MENU
when the unit is in standby mode. .
- Select
BASE SETTING
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm
- Select
ACCESS
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm.
- Select
RESET
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm.
- The display shows
RESET?
- Press
OK
to confirm or
ESC
to leave the setting.
- Enter the BS-Pin code
- Press
OK
to confirm.
6.5.
Remove Handset
With this function you can remove a handset from the base station. Consequently, the handset cannot
be used on this system and must be re-subscribed.
- Press
MENU
when the unit is in standby mode. .
- Select
BASE SETTING
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm
- Select
SETUP
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm.
- Select
DEL. ACCESS
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm.
- Select the desired handset by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm.
- Enter the Base Pin code
BS_PIN:?
- Press
OK
to confirm.
- Press
ESC
to leave the setting.
6.6.
Change Base PIN Code
The standard Pin code is 0000.
To change the Pin code :
- Press
MENU
when the unit is in standby mode. .
- Select
BASE SETTING
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm.
- Select
SETUP
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm.
- Select
BS-PIN
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm.
- Enter the Base Pin code (Standard 0000)
BS_PIN:
- Enter the new Pin code.
- Re-enter the new Pin code
( ---- ---- ).
- Press
OK
to confirm.
- Press
ESC
to leave the menu.
6.7.
Dial Mode (Tone/Pulse) and Recall (Flash) Time (100/600ms)
The factory default is:
Dial Mode: Tone (MFV)
Flash Time: Short (100ms)
ENGLISH
61
Butler 5020
Handl. B5020 euro 18/3/02 12:11 pm Page 61
