1.5
The block for the jib halyard
should line up with the cut out
on the luff tube. Pass one end
of the jib halyard through
the deckeye, and pull it
towards the bottom
of the mast.
1.6
Lead the Jib Halyard to
the other cleat on the mast
and pass it through to secure it.
The other end of the halyard
will be attached to the jib
when it is rigged.
1.7
Open the mast gate.
Place the bottom of the mast
in the mast foot and lift the mast
up until it is vertical.
Once the mast is up close
the mast gate and ensure
the pin is fully down.
1.8
Wrap the sail up clockwise,
so that the hook in the corner
is on the outside.
Once the sail is wrapped up,
place the white loop on the hook
to hold the sail wrapped up while
the rest of the boat is rigged.
5
