Portable Jr
i Conditioners
Manual Temperature-Control System
The manual temperature control system allows you to set
the desired temperature by simply rotating the
WARMER/COOLER dial either left or ri
g
ht. The
supply air fan can be set to run continuously whether the
cooling circuit cycle is on and off. or can be set to cycle
on and off with the cooling circuit.
Filter
All units are equipped with removable, washable.
aluminum-mesh air filters. Located behind the return-air
and discharge-air grilles, these can be removed and
easily cleaned.
Ceiling-Panel Duct Kit
A ceiling-panel duct kit comes complete with flexible
duct and a 2-ft by 2-ft ceiling-tile adapter which allows
condenser air to be vented to the plenum area above a
suspended ceiling.
Discharge Nozzle Kit
A dual-nozzle. discharge-air assembly optimizes the
ability to direct cool
air
precisely where needed. The
flexible nozzles are attached to a mounting plate that fits
over the evaporator-air grille. See Accessory
Information on page 11 for proper sizing.
Condensate Pump
A condensate pump automatically drains the condensate
pan by removing evaporator-coil water allowing
continuous operation_ The pump is connected to the
condensate drain and to the air conditioner's power
supply. A hose runs from the unit to a convenient drain
or outdoor location.
Cord Kit (LCDI) (TZ-12A, 18A, 24A, 36A)
The LCDI cord set provides both personal shock as well
as cord arcing and fire protection. Use the LCDI cord
kit provided by RUPP Industries, Inc.
Condensate Tank
A five-gallon. polyethylene tank in the lower-front
compartment of the unit collects evaporator-coil
condensate moisture. When full. the weight of the tank
activates a cutout switch. turning the refrigeration circuit
OFF and illuminating the condensate tank-full light on
the unit's front. The tank is readily accessible behind a
hinged door. Simply remove, drain, replace. and restart.
Note:
The unit will not operate unless the tank is
drained periodically. An optional condensate
pump is available for continuous operation.
Optional Features
Condenser Duct
Condenser discharge air can be removed from the
conditioned space with flexible duct. Use 40-ft
maximum for all models. Allow six feet for every 90°
bend. Do not exceed 0.10-in we external static pressure
at the condenser.
5
Air Marketing Group LLC
141 kincierkarnack Rd. Park Ridge. NJ 07655 Tel. 201-782-1782 Fax. 201-782-1783 Web: vwvw.amgair.corn Email: info@amgaircom
