SOL-96.110.081 / 260422
TOPAZ Iron
Configuration of the Analyzer
44
AUTO CYCLES tab
The AUTO CYCLES tab contains settings for performing automatic
cycles (necessary for the method to work).
SCHEDULER tab
The SCHEDULER tab allows to configure the number measuring
cycles per channel (multichannel configurations) or to extend the
standard measurement interval by adding a pause between mea
-
surement cycles.
Note:
Since the analyzer is designed for continuous operation, a
maximum duration of 15 minutes is recommended for pauses.
1
Press the “Add” button and select one of the following options:
Pause
Stream 1
Streams 2, 3, 4, 5, or 6 (if applicable)
An entry field for the number of cycles or pause duration
appears to the right of the newly added entry.
2
Tap on the entry field and set the required number of cycles or
pause duration.
3
To remove an entry, press the button next to it.
Stream 1
1Cycle
Pause
5Minutes
Stream 2
1Cycle
Pause
5 Minutes
Add
Add
Add
Add
Add
Add
Add
Add
AUTO. CYCLES
THRESHOLD
DATE/TIME
OPTIONS
SCHEDULER
1 :
2 :
3 :
4 :
5 :
6 :
7 :
8 :
9 :
10 :
11 :
12 :
