Page
15
of
51
7.
Recalling Presets
Pressing any of the numeric buttons [0-9] directly will
recall a stored preset position and settings.
Note:
No action will be executed if a specific numeric preset
position has not yet been saved.
8.
Camera Selection
Press the [1-4] button corresponding to the camera with
the IR address that you want to operate. This allows for
up to 4 cameras to be operated via the same IR remote in
the same room.
9.
Camera IR Address Set
Press 3 buttons in the sequence shown below to
set/change the camera‟s IR address. This allows up to 4
cameras to be controlled from the same IR remote
control. Be sure that only one camera is picking up the IR
signal when you perform this function. If multiple
cameras receive the command, they will all change to the
new address.
Address 1: [*] + [
＃
] + [F1]
Address 2: [*] + [
＃
] + [F2]
Address 3: [*] + [
＃
] + [F3]
Address 4: [*] + [
＃
] + [F4]
10.
Image Freeze
Press the [
] button to freeze or unfreeze the video
image. This can be useful while recalling presets to hide
camera motion from your viewers.
